Ford 7610 Tractor - 2WDKey Features:Make & Model: Ford 7610Drive Type: 2-Wheel Drive (2WD)Conditi (2024)

Lot

2626

In BIG DISCOUNTS - FORKLIFTS, AGRICULTURAL MACHIN...

Please log in or sign up to place a bid.

This auction is live! You need to be registered and approved to bid at this auction.

You have been outbid. For the best chance of winning, increase your maximum bid.

Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.

Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on admin@eama.group for more information.

You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.

Leave a bid now! Your registration has been successful.

Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.

Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.

Ford 7610 Tractor - 2WDKey Features:Make & Model: Ford 7610Drive Type: 2-Wheel Drive (2WD)Conditi (1)

Prev lot: 2601

Next lot: 2651

Buy it now Buy it now

Register to bid online Register to bid online

You're registered for this auction

Waiting for registration approval

Registration has been declined

Please confirm your bid

Current bid:

Bids do not include VAT, buyer’s premium or delivery.

By confirming your bid, you agree that you have read and accepted bidspotter.co.uk and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.

Please confirm purchase

You are about to buy this lot for GBP.

Bids do not include VAT, buyer’s premium or delivery.

By confirming your bid, you agree that you have read and accepted bidspotter.co.uk and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.

Proceed With Buy It Now?

We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.

Would you like to discard your maximum bid and proceed with the buy it now option?

Warning

You cannot Buy it now until you are approved to bid.

Please contact the auctioneer (admin@eama.group)

Your bid is off increment

Choose one of the quick bid options below:

Bids do not include VAT, buyer’s premium or delivery.

By confirming your bid, you agree that you have read and accepted bidspotter.co.uk and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.

Your bid is below the current minimum bid

To place a bid select the minimum amount below:

Bids do not include VAT, buyer’s premium or delivery.

By confirming your bid, you agree that you have read and accepted bidspotter.co.uk and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.

Check Description - NO VAT ON EXPORT, SELL ON AUCTION: Sales@Eama.Group

Auctioneer has chosen not to publish the price of this lot

Check Description - NO VAT ON EXPORT, SELL ON AUCTION: Sales@Eama.Group

EAMA Group

admin@eama.group

Get alerts for new items like this

Description

Ford 7610 Tractor - 2WD

Key Features:

  • Make & Model: Ford 7610
  • Drive Type: 2-Wheel Drive (2WD)
  • Condition: Excellent working condition

Collection: Somerset

Lot Reference: PYZ5412

User Reference: d79c4652620a11cbbf66233f7e198c52

Auction Details

BIG DISCOUNTS - FORKLIFTS, AGRICULTURAL MACHINERY, TRACTORS, DIGGERS, SCISSOR LIFTS, DUMPERS, MACHINERY & PLANT Ends Fri 26th July 13pm

Ends from

Shipping

General delivery information available from the auctioneer

PLEASE NOTE VIEWING OF GOODS OR COLLECTIONS IS BY APPOINTMENT ONLY, IF YOU TURN UP WITHOUT AN APPOINTMENT YOU WILL BE TURNED AWAY - TO BOOK AN APPOINTMENT PLEASE CONTACT ADMIN@EAMA.GROUP

T&Cs & Important Info

Important Information

IMPORTANT INFORMATION -
Please read the information below before bidding as this breaks down the responsibilities of both us as a marketplace and you as a buyer for all auction sales - Please also ensure to familiarise yourself with the full terms and conditions prior to bidding.

1. **Auctioneer Role**: EAMA Group only handles the auction process and collects payment, not the actual sale of items. Any issues with the item must be taken up with the vendor.

2. **Item Descriptions**: We provide item details based on vendor information. Verify descriptions and images yourself, and arrange a viewing if needed.

3. **Errors and Omissions**: We strive for accuracy but aren't liable for errors on our website. Double-check all details before bidding.

4. **Trade Sales**: Our Auctions are not covered by Consumer protection laws.

5. **Registration**: You must register with accurate information before bidding.

6. **Binding Bids**: Once submitted, even if not winning bids can't be withdrawn and are legally binding and enforceable through court.

7. **Final Price**: The winning bid amount plus a Buyer’s Premium (between 5 to 25%) and VAT (20%) makes up the final price. Check each listing under the bidding box for the specific fees. - Payment is only accepted via bank transfer. No other payment methods are accepted.

8. **Account Security**: Protect your account details. You are responsible for any activity on your account.

9. **Valid Bids**: All bids are valid, even if the reserve price isn't met or you are outbid. The vendor may still accept your bid within 48 hours.

10. **No Warranties on Items**: Items are sold as seen with no guarantees on condition. Inspect items thoroughly before bidding.

11. Late Payments and Collection Fees: Payment Requests must be paid within 24 hours. Late payments incur a 5% daily surcharge. Collection must be punctual, or additional fees and potential loss of items without refund may occur.

12. This auction is subject to a Non-Circumvention, Non-Disclosure, and Non-Competition clause.

Terms & Conditions

FULL TERMS:

General:

  • 1. As Auctioneer, EAMA Group is not a party to the primary contract for the purchase of the products auctioned, by participating in the auction, bidders enter into a secondary contract with EAMA Group regarding the payment of auction fees, buyer's premiums, and any associated charges outlined in these terms and conditions. We are not responsible for any action or default on the part of the vendor or buyer including but not limited to, loss or damage in contract or tort, negligence, breach of statutory duty, consequential or indirect losses or damage, legal fees, loss of income or revenue, loss of business, loss of profits or contracts, loss of anticipated savings, loss of data, however arising from.
  • 2. All lots are described to the best of our knowledge based on the information provided by the vendor. We take no responsibility for any listing errors and advise that you check the images and descriptions and if unsure contact us so we can try and get further information. You may be able to arrange a viewing prior to you placing a bid. In some cases, generic images may be used.
  • 3. Whilst every effort is made to ensure there are no errors or omissions on our website, we cannot guarantee this and cannot be held liable for such.
  • 4. All auction sales are trade only, by bidding on items, bidders accept that they are acting as a business and not as a consumer, therefore the applicable law is the Sale of Goods Act 1979. The Consumer Rights Act 2015, and other legislation relevant to consumer contracts does not apply.
  • 5. Bidders are required to register as a trade buyer, prior to bidding. Information provided by the bidder must be complete and accurate.
  • 6. Bids should only be submitted where the bidder intends to complete the transaction, bids cannot be withdrawn as a legally binding contract is formed when a bid is submitted.
  • 7. The final price paid for the lot is the amount of the winning bid plus the Buyer’s Premium between 5% and 25% (see additional fees next to the bidding box for the exact relevant fee)plus VAT if applicable at 20% will be added on top of the the price that you bid – Please review each listing for the specific buyers premium percentage.
  • 8. Bidders are responsible for the protection of log in and account details, these should not be shared with any other person. No exceptions will be made for misuse of a bidders account and any transactions made with the account must be completed and payment made before the payment deadline.
  • 9. All bids are valid, even if at the time of placing it, the reserve is not met or you were outbid, as we always submit all the bid to the vendor during or shortly after the auction (maximum of 48 hours) and they may agree to accept the bid.
  • 10. We reserve the right to reduce or remove the reserve at any time during or shortly after the auction (maximum of 48 hours) at the vendor’s request.
  • 11. Since goods have been available for inspection by or on behalf of the buyer prior to the sale, no warranty, condition, description or representation on the part of the seller is given or implied; nor is any warranty, condition, description or representation to be taken to have been implied from anything said by or on behalf of the seller prior to the auction. Any statutory or other warranty, condition or description expressed or implied as to the state, quality or fitness of the goods is hereby expressly excluded. Contracts for sale cannot be rescinded or rejected, or any compensation given due to any statements, errors or omissions contained in the catalogue.
  • 12. From time to time, additions and amendments may be made to the lot description, bidders are advised to review the description before bidding.
  • 13. The vendor, his agent, or the auctioneer may bid on any lot up to the reserve price.
  • 14. Buyers intending to export goods should contact us prior to bidding otherwise VAT will be charged.

Vehicles:

  • 15. All vehicles are sold as seen, there is no express or implied warranty that the vehicle is roadworthy, mechanically sound or has been maintained in any condition. Lots may not be fit for purpose or of satisfactory quality at the time of the auction and may require substantial repair at the expense of the buyer.
  • 16. Lot information is provided for convenience only. You agree that you will not rely on lot information in deciding whether or how much to bid on any lot. Lot information includes without limitation: year, make, model, condition, damage amount, damage type, roadworthiness, drivability, accessories, mileage, odometer readings, vehicle identification numbers, title, repairs needed, repair cost, repair history, title history, service history and total loss history. The Auction House does not assume liability for any bumps, scratches, window cracks, or chips present on vehicles sold through our platform. These imperfections may or may not be visible in provided images or descriptions. Bidders and buyers acknowledge that vehicles are sold on an "as-is" basis, and the Auction House is not responsible for any discrepancies between the physical condition of the vehicle and its representation. By participating in our auctions or purchasing vehicles, all parties release the Auction House from any claims related to vehicle imperfections.
  • 17. EAMA carry out a basic check on each vehicle to check that it is not stolen, we are reliant on that information and as a 3rd party, we cannot be held responsible for any inaccuracies - EAMA do not check for insurance write off's and therefore we are unable to advise as to whether a vehicle has been involved in a previous accident - Bidders should make their own investigations where a vehicles insurance history is critical.
  • 18. The lots we offer for sale may be damaged, missing components or parts. We do not guarantee that vehicles meet or can be modified to meet local emission or safety or legislative requirements. It is your sole responsibility to ascertain, confirm, research, inspect and/or investigate to your satisfaction the lot information prior to deciding to bid and how much you wish to bid on any lot taking all of the above into account. By bidding you have agreed that we have provided sufficient details for you to make an informed choice when bidding. You agree you have bid accordingly.
  • 19. Bidders should make their own investigations where dimensions, mileages, hours, condition or authenticity are critical. You should not accept that the odometer reading is correct. We will attempt to verify mileages however, even if marked 'verified', that will be only verified by the information that is available at the time of listing and is given as a guide, not a warranty. No odometer readings are warranted unless stated “warranted” in the lot details

Electrical items:

  • 20. Electrical appliances are bought at your own inspection & should be checked by a qualified person before use.

Conclusion of the auction:

  • 21. The auctioneer does not have to accept the highest bid and all bids are due to approval and acceptance by the vendor.
  • 22. When the auction has ended, an invoice will be sent to the winning bidder. This must be paid within 24 hours of receipt, failure to do so will result in additional surcharges of 5% of the full order value per day, the minimum charge is £20
  • 23. To collect goods, the buyer must contact EAMA Group to arrange a timeslot. Buyers may be turned away if they arrive without an appointment or in an unsuitable vehicle.
  • 24. EAMA Group may be able to assist buyers in arranging the delivery as a convenience. However, it's important to note that any such delivery service is entirely separate from the contract for the purchase of the goods. EAMA Group does not offer insurance coverage for potential loss or damage that may occur during transport. Consequently, in the event of loss or damage during delivery, EAMA Group assumes no liability, and no refunds will be provided for any aspect of the order. Buyers are encouraged to contact EAMA Group for delivery inquiries, but it is essential to understand that the responsibility for insuring the goods during transit lies with the buyer.
  • 25. Goods cannot be collected until the order or any fees have been paid for.
  • 26. On arrival, buyers will be required to provide suitable identification, and request a porter to collect the goods.
  • 27. Goods must be collected punctually to avoid the loss of your items with no refund. If specific collection dates are explicitly stated in the listing description, these dates are considered fixed, and no flexibility is allowed. Buyers are required to strictly adhere to these specified dates, as any failure to do so will result in the forfeiture of purchased goods without the possibility of a refund. In the absence of specified dates, a delivery quote or a mutually agreed-upon collection date will be determined following payment on the lot. In the event that the item remains uncollected on this agreed-upon date or the delivery quote is not paid, a 3-day grace period will be granted. Beyond this grace period, a 5% daily charge of the full order value will be imposed for late collection, and the goods will only be released upon payment of these charges. If a buyer does not collect the items within 20 days, they will be classified as abandoned, and neither the goods nor a refund will be provided.
  • 28. Assistance with loading may be arranged prior to collection, a lift on fee may apply.
  • 29. Where goods are sold on a pallet, it is the buyer’s responsibility to take the pallets and everything on them including the pallet wrap to avoid a clean-up charge of £10 a pallet.
  • 30.The auctioneers will not be responsible for any loss, damage or injury occasioned or sustained by persons or vehicles on the premises or for goods in transport.
  • 31. Any goods that are still in our possession after your designated time slot will not be released until all charges are settled. If the bill is not settled and /or your goods have not been collected within 30 days of your designated time slot, the ownership of the goods will transfer to EAMA Group and you will not be refunded.
  • 32. EAMA Group nor the vendor shall not be liable to the buyer and/or be deemed to be in breach of the contract by reason of any delay in relation to performing, or collection when the failure is due to any cause beyond EAMA Group or the vendors reasonable control (including but not limited to natural disaster, lock out or other industrial action, governmental action or restriction, war, terrorism, cyber-attack, fire, flood, infrastructure failure, power failure, strike or civil commotion, interruptions in electrical or telecommunications services or delays or failures of the internet or other communications systems necessary for the provision of the Services, issues fulfilling the contract due to unforseen circ*mstances) and time for performance of that obligation shall be extended accordingly.
  • 33. In the event that a vendor fails to fulfill the contract, EAMA Group reserves the right to cancel the contract for those items and issue a refund without incurring any additional liabilities nor providing any compensation. This includes, but is not limited to, any expenses or costs incurred by the buyer, loss of income or replacement costs.

Breach of contract:

  • 35. After 5 days of non-payment, in order to prevent incurring excessive charges, we will presume that you do not intend to honor the contract. Consequently, a settlement amount will be assessed, encompassing the cost of the Buyer's Premium (plus VAT), a late payment fee of 5% (plus VAT) per day, calculated on the full order value, and a £100 administrative fee. This accumulation will lead to the contract's cancellation. Failure to settle this amount will result in legal action being pursued.

Non-Circumvention, Non-Disclosure, and Non-Competition

  • 36. The parties agree that during the term of this agreement and for a period of 12 month, neither party shall, directly or indirectly, without the express written consent of the other party:
  • 37. Disclose any confidential information obtained in connection with this agreement to any third party;
  • 38. Solicit, contact, or do business directly with the other party's vendors, suppliers, or consignors identified under this agreement, or in any way interfere with or circumvent the other party's relationship with such vendors, suppliers, or consignors
  • 39. Bid on or purchase any items consigned to the auction house and then contact or do business directly with the consignor of such items without the express written consent of the auction house;
  • 40. Compete with the auction house in the provision of auction services within the UK during the term of this agreement and for a period of 12 Month thereafter.
  • 41. This clause shall survive the termination of this agreement for any reason.

Feedback, Confidentiality or Non-Disclosure:

  • 42. Our vendor details are considered confidential information and should not be shared publicly. Any breach of this confidentiality agreement may result in legal action being taken against the party responsible, as well as financial damages to compensate for any losses suffered by our company as a result of the breach.
  • 43. We encourage all customers to provide feedback on our service to help us improve. If you have any issues, you must contact us directly to resolve them. We reserve the right to take appropriate action if any feedback is found to be false or misleading, including the right to seek financial damages to compensate for any losses suffered by our company as a result of the feedback.
  • 44. Feedback related to the service our vendors provided should be directed at our vendors and not posted publicly on our (EAMA Group's) feedback profiles. We reserve the right to take appropriate action if any feedback is found to be false or misleading against our company, including the right to seek financial damages to compensate for any losses suffered by our company as a result of the feedback.

See Full Terms And Conditions

Auctioneer:

EAMA Group

admin@eama.group

Ask seller a question

Thank you!

Your question has been sent to the auctioneer.

There was an error sending your enquiry, why not try again later

Ford 7610 Tractor - 2WDKey Features:Make & Model: Ford 7610Drive Type: 2-Wheel Drive (2WD)Conditi (2024)

FAQs

What is the difference between Ford 7610 and 7810? ›

7810 is a six cylinder version of the 7610, it's a standard profile tractor, good tractor but with the lower sheet metal and lower setting cab everything is packed in tight making them hard to work on. I have a 6610 with cab, had to take the hood off just to change the thermostat and sending unit.

What kind of engine is in the Ford 7610? ›

The tractors 4.4 litre 4-cylinder turbo charged engine received an upgraded cylinder head, injectors and fuel pump pushing horsepower to 105 while also improving fuel economy.

What is the difference between the 7610 and 7710? ›

Although smaller in stature, the 7610 shares the same engine as the 7710 and also produced identical horsepower. However, the 7710's trump card was its flat floor Q cab with floor-mounted gearsticks which offered a commanding driving view, thanks to its higher stature.

How much does a 7610 Ford tractor weigh? ›

Operating Specifications
3 Point Hitch Lift Capacity @ 24 inches4,471 lbs (2,028 kg)
Fuel Capacity35 gal (131 l)
Hydraulic System Fluid Capacity15 gal (57 l)
Operating Voltage12 volts
Operating Weight5,935 lbs (2,692 kg)
1 more row

How many HP is a JD 7610? ›

2001 John Deere 7610 MFWD, 140HP, 12450 hours, 16 speed power quad with RH reverser, 3pt, 540/1000 pto, 2 remotes, front weights, new rubber all around, runs and shifts good, solid tractor.

What is the difference between Windsor V8 and LS? ›

In addition to the coolant and oil passage differences, the LS series uses thinner stems (8mm) and lighter valves than the older Windsor V8 valves. The LS V8 engine series also has longer-length valves and a higher maximum valve lift rating than the stock Windsor head. The combustion chambers are different as well.

What year is my 7610 Ford tractor? ›

Specifications
Make: FordModel: 7610Years Made: 1982-1992
Engine-Cyl(s)-CID: 4/304Transmission-STD: CMOptional: PS
Fwd/Rev Standard: 8/2Fwd/Rev Optional: 16/4Mfwd-Std/Opt: STD
Tires-Std Front: 7.50-16Tires-Std Rear: 16.9-30Wheelbase-Inch: 87.5
Pto Type: INDPto Speed: 540 1000CAT I-3pt Hitch: True
6 more rows

What is the smallest engine Ford ever made? ›

But now Ford is going small by announcing the "the smallest engine Ford has ever built." Ford says the fuel-efficient 1.0-liter engine is a "three cylinder engine that delivers the same performance as a four-cylinder."

What kind of hydraulic oil does a Ford 7610 take? ›

Transmission/rear axle/hydraulics/dual power are all common sump. Fill to the full mark on the dipstick with New Holland 134D hydraulic oil or its equivalent.

What engine is in a John Deere 7710? ›

What Engine is in a John Deere 7710? This row crop tractor has a John Deere 6081T engine, which features six cylinders and operates on diesel. It has a displacement of 496 cubic inches and an operating speed range up to 2100rpm.

What is the difference between 126710 and 16710? ›

16710, there are significant differences besides the Jubilee bracelet. While they're both 40mm and constructed from stainless steel, the case of the new ref. 126710 has a significantly more bold apperance with thicker lugs, broader crown guards, and a larger Triplock crown (compared to the smaller Twinlock on the ref.

What is the difference between the P1 and the P38 pistol? ›

The main difference between the German army's P1 and the old P38 is the frame, which is of black-finished aluminum alloy on the P1. The newer gun's grips were well checkered, and gave better control of the gun than the old version. They were a touch smaller in girth too.

Is a Ford 7610 turbo? ›

The 7610 is a nice lightweight tractor at four tons and is powered by Fords 4.4l engine, turbocharged and equal in bore and stroke, producing 98hp. Hydraulic output is rated at 70l/min, with a very respectable 4.2t lift capacity and was available in both 2wd and 4wd.

How much weight does a pro stock tractor pull? ›

Pro Stocks compete on 24.5″ wide tires and at 10,000 lbs., they are the heaviest of the tractor classes. Tractor Pulling is called the “Heaviest Motorsport on Earth” and the Super Semis are the heavyweights of tractor pulling.

How much horsepower does a 7810 Ford have? ›

Using the same bore and stroke of 4.4inches, the naturally aspirated engine produces 98hp on Force II models, and was slightly uprated to 103hp for Generation III tractors.

How much HP does a 7810 have? ›

The engine of a John Deere 7810 tractor has 175 hp (horsepower).

What year did the Ford 7810 come out? ›

THE Ford 7810 tractor requires little introduction – it's a well-balanced, six-cylinder workhorse that proved to be a bread-and-butter seller for Ford. Launched in 1987, the 7810 Series II was an instant hit – being a light and manoeuvrable tractor, yet packing a punch thanks to its gutsy 6.6l engine pumping out 100hp.

What is the difference between a Ford Windsor and Cleveland V8? ›

The 351 Cleveland had a beefier crankshaft and better airflow than the Windsor. That, combined with the option of two-barrel or four-barrel cylinder heads, made the 351 Cleveland the preferred choice for high-performance builds. DeTomaso even put the American engine into its deeply cool Pantera supercar.

References

Top Articles
Latest Posts
Article information

Author: Manual Maggio

Last Updated:

Views: 6053

Rating: 4.9 / 5 (69 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Manual Maggio

Birthday: 1998-01-20

Address: 359 Kelvin Stream, Lake Eldonview, MT 33517-1242

Phone: +577037762465

Job: Product Hospitality Supervisor

Hobby: Gardening, Web surfing, Video gaming, Amateur radio, Flag Football, Reading, Table tennis

Introduction: My name is Manual Maggio, I am a thankful, tender, adventurous, delightful, fantastic, proud, graceful person who loves writing and wants to share my knowledge and understanding with you.